• 208V/240V capability
• Floor-standing tower, 19-inch rack and cabinet installation kits included
• 23-inch rack or cabinet installation kit optional
• Wallmount installation kit optional
• 3.5-inch (2U) rack/tower case style
• Up to a 0.8 power factor (in watts) for larger capacities
• Output receptacle control for non-critical load shedding capability
• Extended runtime using external battery packs
• Independent battery pack chargers to reduce battery recharge times
• Simultaneous RS-232, USB and SNMP communications
• Minuteman® SentryPlus™ UPS monitoring and control software
• Front panel display with load/battery meter and status indicators
• 3-year non-prorated warranty (including batteries)
• Dedicated remote Emergency Power Off (EPO) port
• Hot-swappable batteries
• RoHS compliant
• $200,000 Minuteman Platinum Protection Plan® (U.S. and Canada only)

Indicators include:

ONLINE (green) constantly on when operating in on-line mode

LINE (green) on when unit is plugged in and acceptable utility voltage present

BYPASS (yellow) flashes when unit is in bypass mode

LOAD (yellow) constantly on when unit is operating in the On-line or Bypass mode. Percent of load capacity indicated (25, 50, 75 and 100% with green LEDs)

BATT (yellow) constantly on when the unit is operating On-Battery mode. Percent of available capacity displayed)100, 75, 50 and 25% with green LEDs

OVERLOAD (red) constantly on when unit senses an overload condition

FAULT (red) constantly on when unit has an internal fault and not functioning properly

BATT LOW (yellow) constantly on when unit reaches a low battery warning

REPLACE BATT (red) constantly on when unit senses a weak, bad or disconnected battery

ON-TEST button– Pressed to turn on unit or to test

OFF button – pressed to turn unit off

Output Power Factor

All Endeavor models up to 2000VA come with a 0.8 output power factor that increases the watt capacity of the units. Offering larger capacities in smaller UPS VA sizes reduces the overall cost of the UPS solution for a specific load requirement. The 3000VA model comes with a 0.7 power factor that provides 2,100 watts capacity in a 3.5” (2U) rack space.

Output Voltage

All units in the Endeavor Series produce an electrical signal that does not vary from nominal voltage by more than 2%. Tightly regulating the output voltage increases the quality of power to connected equipment adding to its life expectancy, which lowers the total cost of ownership to users.

Total Harmonic Distortion (THD)

THD is the distortion of a normal AC electrical signal commonly caused on UPS products when connected loads near the capacity of the units. This distortion can create internal heat build-up on sensitive equipment not designed to allow for these altered AC signals. The Endeavor Series maintains an output AC signal, at all times and with all loads, within 2% of a true sinewave.

Output Receptacle Control

The ability to extend the runtime of critical devices during an extended blackout is handled through the Endeavor’s load shedding function. Each model in the Endeavor Series comes with two independently-circuited receptacle segments. Through the use of Minuteman’s SentryPlus software or communication with the UPS through an Ethernet/SNMP connection, users can either turn on, off, or reset each segment independently of the other. By reducing the load amount on the UPS, the runtime of critical devices on the UPS battery can be extended.

Simultaneous RS232, USB and Ethernet/SNMP Communications

The Endeavor Series provides users with the ability to communicate with the UPS simultaneously through three separate protocols: RS232, USB and SNMP Users can now directly connect, and manage, the UPS from multiple stand-alone, or networked, computers. By including concurrent Ethernet communications, (SNMP or direct IP address), the Endeavor Series can provide detailed monitoring and management to many various environments.

RoHS 2 Compliance

Recognizing the benefit of being environmentally conscious, Para Systems developed the Endeavor Series to be compliant with the European Economic Unions directive on the reduction of hazardous substances (RoHS 2), in electronic equipment.

Manual and Automatic Self-Testing

The Endeavor UPS is designed to proactively notify users of any impending faults or failures with the UPS. This allows for preemptive repair or replacement of components or batteries preventing unexpected downtime caused by the UPS.

Dedicated EPO Port

This direct access port allows users to perform an immediate remote shutdown of the UPS in cases of emergency or when access to the UPS is restricted or inconvenient.

Extended Runtime Capability

All models in the Endeavor Series come standard with internal batteries. To protect critical devices through extended blackouts, the Endeavor Series utilizes external battery packs that can be daisy-chained in unlimited quantities to provide a virtual unlimited amount of runtime.

Fast Battery Recharge

With independent chargers in each battery pack offered for the Endeavor Series, the maximum recharge time for depleted batteries is 8-hours from a total discharge, no matter how many battery packs are installed on a UPS. Without these chargers, if more than one battery pack is used battery charging could take more than an entire day.

Battery Technology

All Endeavor units and battery packs use valve-regulated lead-acid batteries (VRLA). All are safe for any type of freight transport: air, sea or ground. For added protection, all Endeavor UPS models ship with these batteries disconnected. A “Quick Installation Guide” is included in each Endeavor box to detail how to connect the batteries before turning the units on.

Hot-Swappable Batteries

All models in the Endeavor line offer battery replacement, through the front panel of the UPS, without having to remove the UPS from service. Connected loads are protected from voltage anomalies and spikes and surges while the batteries are being replaced.